Casio EXILIM EX-FH20 - Manual (Page 44)

44
Snapshot Tutorial
NOTE
• The higher the digital zoom factor, the coarser the recorded image. Note that the
camera also has a function that lets you record using digital zoom without image
deterioration (page 44).
• Use of a tripod is recommended to protect against image blur due to camera
movement when shooting with telephoto.
• Performing a zoom operation changes the lens aperture.
• Digital zoom is disabled while “RAW+” is selected for the “Image Size” setting
(page 33).
• Both optical zoom and digital zoom are disabled during High-speed Movie
recording.
• Both optical zoom and digital zoom are disabled when “Á Super Macro” is
selected as the focus mode.
If you hold the zoom controller towards z (Telephoto), the zoom operation will stop
when the optical zoom factor reaches its maximum. Momentarily releasing the zoom
controller and then holding it again towards z (Telephoto) will switch to digital
zoom, which you can use to set an even higher zoom factor.
• If you do want to use digital zoom, change the “Digital Zoom” setting to “On” (page
82).
• During zoom, a zoom bar on the monitor screen shows the current zoom setting.
Optical Zoom/Digital Zoom Switch Point
Image deterioration indicator
Zoom bar
Focusing range
(Displayed for Auto Focus, Macro Focus, and Manual
Focus.)
* Products marketed in some geographic areas display
inches and feet.
Focal distance
(Converted to 35mm film format.)
* The displayed focal distance (angle of view) and the actual angle of view may be
different when using continuous shutter (except in the Single Shot Mode), when
shooting a movie, and when using some BEST SHOT scenes.
B