Casio EXILIM EX-FH20 - Manual (Page 114)

114
Using the Camera with a Computer
4.
Turn off the camera and then use the USB cable that comes with the
camera to connect it to your computer.
• The camera does not draw power over the USB cable. Check the battery level
before connecting and make sure it is not too low.
• Make sure that you insert the cable connector into the USB/AV port until you
feel it click securely into place. Failure to insert the connector fully can result in
poor communication or malfunction.
• Note that even while the connector is fully inserted, you still will
be able to see the metal part of the connector as shown in the
illustration.
• When connecting the USB cable to a USB port, make sure you
align the connector correctly with the port.
• Your computer may not be able to recognize the camera if you connect via a
USB hub. Always connect directly to the computer’s USB port.
5.
Turn on the camera.
6.
Copy images to your computer.
Windows XP
1 Select “Open folder to view files” and then click “OK”.
2 Drag the “DCIM” folder to your Windows desktop to copy it.
Windows Vista
1 Select “Open folder to view files”.
2 Drag the “DCIM” folder to your Windows desktop to copy it.
Windows 2000
1 Double-click “My Computer”.
2 Double-click “Removable Disk”.
3 Drag the “DCIM” folder to your Windows desktop to copy it.
USB port
USB cable
Making sure that the 6 mark on the camera is
aligned with the 4 mark of the USB cable
connector, connect the cable to the camera.
USB/AV port
Large connector
Small connector