Envirco NSF Biohazard Cabinet - Manual (Page 13)

13
Service Connection
Make sure that a 20 amp, 115 V outlet with the proper receptacle is available for the
10448 - EBC 47, 4-Ft Type A/B3. Both the 10276, 6-Ft Type A and the 10451, 6-Ft
Type B3 units require a 30 amp, 115 V outlet with the proper receptacle.
Connect the air, gas or vacuum service line to the external connection point located
on the top of the cabinet. The connections should be field tested for leak tightness.
Warnings and Other Identification Label Locations
Service Connection
Warning
Biohazard Warning
Service Card and Holder
Switch and Data Plate
Circuit Diagram (inside)
NSF Seal
Certification Warning
Flammable Materials Warning
FRONT VIEW
Figure 4: Top and Front Cabinet Views with Label Locations