Playing compact discs, Normal playback – Emerson Radio CKD9917 User Manual

Page 13

Playing Compact Discs

NOTE: This CD player can read CD-R/RW discs, in addition to normal CDs,

however; the compatibility of CD-R/RW discs may be affected by the type of

software that was used to create the discs, as well as the quality and condition

of the blank media you are using. 100% compatibility cannot be guaranteed.

This is not an indication of a problem with the player.

Normal Playback

1.) Press the

ALARM OFF/POWER button to switch the unit ‘On’. The

POWER indicator will light.

2.) Press the

button to enter CD playing mode

3.) Press on the CD door in the area marked

OPEN to open the door. If you have not

already done so, remove the ‘dummy CD’

transit protection card from the CD player and

discard it.

4.) Place your disc on the center spindle with the printed label side facing up.

Press down near the center of the disc to make sure it is firmly ‘seated’ on

the spindle, press OPEN area to close the CD door.

5.) The “ – –” of “cd – –” flashes while the player

reads the disc. The display will show the total

number of tracks for a few seconds and then

return to the correct time. To see the track number

at any time during playback press the

ALARM

SET/DISPLAY button. The track number will

appear for several seconds and then the

display returns to the correct time.

NOTE: If the disc is inserted incorrectly, or if

the disc is badly scratched and cannot be

read by the player, “d ISC” will appear on the

display for a few seconds, and then the

display returns to the correct time.

MON

PLAY

MON

PLAY

MON

6.) Press the

button to begin playback. The

display will briefly show

“cd: 01” (Track 1)

and playback on track 1 begins. After a few

seconds the display returns to the correct

time.

This manual is related to the following products:

CKD9917BK