Emerson Radio CKD9905 - Manual (Page 13)

13
OPERATION (CONTINUED)
Press and hold the CLOCK button and
the time will blink in the Display.
1
While holding the CLOCK button ❶,
press the SKIP/Search/MINUTE
button ❷ to advance the minute and
the SKIP/Search/HOUR
button ❸
to advance the hour until the desired
time is shown on the display.
1
3
2
2
TO SET OR RESET THE ACTUAL TIME
Press and hold the desired ALM SET
button (ALM.1 or ALM.2) and the
selected alarm time will blink in the
Display.
1
While holding the desired ALM SET
button button ❶ , press the
SKIP/Search/ MINUTE
button ❷
to advance the minute and the
SKIP/Search/HOUR button
❸ to
advance the hour until the desired
alarm time is shown on the display.
1
3 1
2
2
TO SET OR RESET THE ALARM TIME(S)
AM (TIME) LED INDICATOR
In the upper left corner of the Display is the AM LED indicator. When the AM LED
indicator is lit, the actual or alarm time shown in the Display is AM hours. When
the indicator is not lit, the time shown is PM hours.
CKD9905 O/M.QXD 3/11/03 3:54 PM Page 13