Emerson Radio ES1065 User Manual

Page 33

To Set The ‘OFF’ Time

7.) Press the MODE button until the “TIMER

OFF” indicator is flashing in the display.

8.) Press the MEMO. (MEMORY) button. The

Hour digits begin flashing.

9.) Press the

button to set the display

to the desired turn ‘Off’ hour, AM or PM.

10.)Press the MEMO. (MEMORY) button. The

Minute digits begin flashing.

11.) Press the

button to set the display

to the desired turn ‘Off’ minute.

12.)Press MEMO. (MEMORY) button once again

to confirm. After few seconds, the display

returns to correct time.

The TIMER indicator appears in display meaning that the Timer function is

activated.

At the selected “TIMER ON” time the system will turn on automatically to the last

function selected, either Tuner or CD.

It will play until it reaches the selected ‘Off’ time and then shut off automatically.

Note:

If the system turns on to CD function it will only play until the end of the disc and

then stop.

If you programmed the system to turn on and play for 3 hours before shutting off,

but your CD is only 45 minutes, the system will only play for 45 minutes but the

power will remain On for another 2 hours and 15 minutes before shutting Off

automatically.

To Deactivate or Activate Timer (On Front Panel Only)

Press the TIMER button on front panel to activate or deactivate the Timer function.

ES1065_021705.p65

17/2/2005, 15:41