Emerson Radio ES1065 - Manual (Page 30)

29
Programmed Playback
The Programmed Playback feature allows you to program a total of up to 40 tracks
from both discs for playback in any desired order. You may program the same track
to play several times within a program sequence if desired.
Note: You cannot program tracks during playback. If a disc is playing press
the STOP button first to stop playback before beginning the programming
steps below.
1.) Load up to 2 discs in the player and wait until the player has read the Table of
Contents of all discs.
2.) Press the MEMO. (MEMORY) button.
The MEMORY and Disc 1 indicators will flash
and the display will show Track “01” and
Program Memory “P- 01”.
3.) Press CD 1 or CD 2 buttons to select the disc that contains the first track to be
programmed. (Example: Disc 2).
Then press the or buttons to select ct
the first track on that disc to be programmed.
(Example: Track 07).
4.) Press the MEMO. (MEMORY) button again
to enter Disc 2 / Track 07 in program memory.
The program memory number advance to
“P – 02”.
5.) Repeat steps 3 and 4 selecting the desired Disc number and Track number
each time until you have entered up to 40 tracks in the CD program memory.
Note: You may also select the track numbers directly with the 1-9 number
buttons on the remote control.
ES1065_021705.p65 17/2/2005, 15:41 29