Emerson Radio ES1065 - Manual (Page 31)

30
• For tracks 1 through 9 simply press the corresponding number button.
• For tracks 10 and higher first press the “+10” button and then the
corresponding button for the second digit.
• For track 12, press “+10” and then press “2”.
• For track 23 press “+10” twice, then press “3”.
6.) Press the button to begin programmed
playback. The MEMORY indicator stops
flashing and remains ‘On’.
The player will play all the tracks that you
programmed in the desired order.
• After the last programmed track has played
the player stops, but the MEMORY indicator
remains ‘On’ and the programmed sequence
remains in the memory.
• To play the programmed sequence again, press the button.
• To cancel the programmed sequence from the memory press the STOP
button while the player is stopped. The MEMORY indicator disappears.
• The Program sequence can also be cleared from the memory by opening the
CD door, switching to Tuner or Aux function, or pressing the STANDBY
button to return the system to the Standby (Off) mode.
Programmed Repeat Playback
You can use the Programmed and Repeat Playback functions together to
continuously repeat a programmed sequence.
First program up to 40 tracks as described on page 29, then press the REPEAT
button three times to select REPEAT ALL DISC playback.
Press the button to begin Programmed Repeat
Playback. The programmed sequence will be
repeated continuously.
ES1065_021705.p65 17/2/2005, 15:41 30