Playing cassette tapes – Emerson Radio DTE288 User Manual
Page 18

1 7
Playing Cassette Tapes
1.) Open the cassette door by pressing the STOP/EJECT
key..
2.) Place a pre-recorded cassette tape with the exposed tape facing up and the full
reel on the right side.
3.) Move the FUNCTION selector to the OFF-TAPE position.
4.) Press the cassette PLAY
key to begin playback.
5.) Set the VOLUME control as desired.
6.) To advance the tape rapidly press the F. FWD
key. To stop the tape before
it ends press the STOP/EJECT
key..
7.) To rewind the tape rapidly press the REWIND
key. To stop the tape before it
ends press the STOP/EJECT
key..
8.) When the tape ends the Automatic Stop System releases the PLAY
key and
shuts off the tape motor. You may then open the cassette door, remove your
tape, turn it over and play the other side if desired.
9.) When you are finished listening stop the tape, open the door, remove the tape
and close the door.
If you are playing a tape and then switch to the RADIO or CD function be sure
to press the STOP/EJECT
key to disengage the tape mechanism. This
prevents excess wear and tear on the mechanism.
DTE288_080505.p65
5/8/2005, 10:56
17