Emerson Radio DTE288 - Manual (Page 16)

1 5
Programmed Playback
You can program up to 20 tracks on a disc to playback in any desired order. You
may also program a specific track to play several times within the same program.
Note: The player cannot be programmed while a disc is playing. If a disc is playing
press the STOP button to stop playback before you begin the programming
steps below.
1.) Move the FUNCTION selector to CD position, insert your disc in the player,
close the door, and wait until the total track number appears in the display.
2.) Press the PROGRAM button once.
The “01.” Indicator begins flashing in the display.
3.) Use the FWD. or REV.. buttons to select the first track to be programmed.
Example: Track “8”.
4.) Press the PROGRAM button once again to enter the track “8” in program
memory number “01”.
Track number “8” disappears and the program number
advances to flashing “02.”, indicating that you may now select
a track to be entered in program memory number “02”.
5.) Use the or buttons to select the next track to be programmed. When
the desired track number appears in the display press the PROGRAM button
again to enter that track in the program memory.
6.) Repeat Step 5 until you have entered up to 20 tracks in the program memory.
7.) To begin programmed playback press the PLAY/PAUSE button.
The LED display will show the first programmed track and
playback will begin on that track. The “dot” Indicator flashes.
DTE288_080505.p65 5/8/2005, 10:56 15