Emerson Radio DTE288 - Manual (Page 12)

1 1
Listening To The Radio
1.) Move the FUNCTION selector to the RADIO position. The POWER indicator
comes ‘On’.
2.) Move the BAND selector to the desired band, AM, FM or FM ST.
3.) Tune to your desired station with the TUNING control. If you have set the BAND
selector to FM ST. and you tune to a FM Stereo station the FM ST. LED Indicator
will light.
Note: If you are listening to a weak FM Stereo station you can usually improve
the reception by moving the BAND selector from the FM ST. position to the FM
position, however the sound will now be mono.
4.) Set the VOLUME control to the desired level.
5.) When you are finished listening move the FUNCTION selector back to the
OFF-TAPE (Power Off) position to shut the power ‘Off’ and extend the battery
life. The POWER indicator goes ‘Off’.
Antenna Information
AM
The AM antenna is inside the cabinet.
If AM reception is unsatisfactory try
rotating the entire unit until you find the position
that provides the best reception.
FM
Extend and vary the direction of the FM telescopic
antenna to find the position that provides the best
reception.
OPERATING INSTRUCTIONS
DORA Phrase Button
Press the DORA Button repeatedly in any mode to hear Dora phrases.
DTE288_080505.p65 5/8/2005, 10:56 11