Emerson Radio DTE288 - Manual (Page 14)

1 3
4.) Press the PLAY/PAUSE button to begin playback on Track
number “1”. The Play “dot” indicator appears in the display.
• To skip to higher or lower numbered tracks during playback press the FWD
or REV button repeatedly until the desired track number appears in the
display. Playback will begin on the selected track.
• To search rapidly forward or backward during playback to locate a specific
portion of a track, depress and hold the FWD or REV button.
The player will search rapidly forward or backward as long as the buttons are
depressed. Normal speed playback will resume when the buttons are released.
• To Pause momentarily during playback press the PLAY/PAUSE button
again.
The sound stops and the “Track number” flashes, however the
disc continues to spin.
To cancel Pause and resume normal playback press the PLAY/PAUSE
button once more. Normal playback resumes and the “Track number” stops
flashing.
5.) Adjust the VOLUME control as desired.
6.) To Stop playback at any time press the STOP button. The disc stops and the
display again shows the total number of tracks on the disc.
After the last track has played the disc stops automatically and the display
again shows the total number of tracks on the disc.
7.) Open the CD door, remove your disc, and close the CD door again.
8.) Move the FUNCTION selector to the OFF-TAPE position to shut the power
‘Off’. The POWER indicator goes ‘Off’.
To Start Playback From A Specific Track
Insert your disc in the player, close the door, and wait until the display shows the
total tracks.
Press either the or buttons until the desired track number appears in the
display, then press the button to begin playback on that track.
DTE288_080505.p65 5/8/2005, 10:56 13