EDCO ALR-BS - Manual (Page 7)

Printed in USA
TVW
©2006
Page 7
E-ALRE-I-0706
100 Thomas Johnson Drive, Frederick, MD 21702-4600 USA
Phone (301) 663-1600 • 1-800-638-3326
Fax (301) 663-1607 • 1-800-447-3326
Website: www.edcoinc.com • Email: [email protected]
PROCEDURE FOR LUBRICATING THE ALR
To lubricate the ALR put four (4) to fi ve (5) drops of light weight machine oil in the hose connector
circled above before connecting the air supply, graphite oil in extremely cold weather.
Be sure the chisel is oriented correctly. When in the operating position the straight fl at edge should
be closest to the work surface and the beveled edge should be facing up as shown in the photo
above.
CORRECT POSITIONING OF THE CHISEL