EDCO CPU-10FC - Manual (Page 3)

Printed in USA
TVW
©2005
Page
E-CPU10FC-I-0905
100 Thomas Johnson Drive, Frederick, MD 21702-4600 USA
Phone (301) 663-1600 • 1-800-638-3326
Fax (301) 663-1607 • 1-800-447-3326
Website: www.edcoinc.com • Email: [email protected]
Equipment Instruction Manual
EDCO Model CPU-0FC
What to Expect ........................................................................................................................4
Safety Guidelines......................................................................................................................5
Operation Instructions.............................................................................................................6-11
Maintenance Instructions.......................................................................................................12-13
Silica Dust Warning..................................................................................................................14
Maintenance Schedule.............................................................................................................15
Limited Equipment Warranty............................................................................................back cover
Figure 1
Table of Contents
Section Page Number
HOW TO ORDER REPAIR PARTS
To insure product safety and reliability, always use genu-
ine EDCO replacement parts when making repairs to the
equipment.
When ordering parts, please specify the MODEL and SERI-
AL NUMBER of the machine as given on the NAMEPLATE.
In addition, give part number, description and quantity as
listed on the parts list.
Please note: Due to improvements and changes in the
equipment the illustrations shown may be different from the
actual machine.
Toll Free: Voice 1-800-638-3326 • Fax 1-800-447-3326
62”
157.5cm
12”
30.5cm
48”
122cm
47”
120cm
22 1/2”
57cm
34”
86.5cm
22”
56cm
22 1/2”
57cm
CPU-10-FC
29 1/2”
75cm
CPU-10FC
W/OUTRIGGER
Model
Length
Width
Height
Weight
CPU-10FC
47”/120cm
22 1/2”/57cm
34”/86.5cm
530lbs/240kg
Specifications and dimensions are
approximate and subject to change.