EDCO CPU-12 - Manual (Page 11)

E-CPU12-I-0113
Printed in USA
TVW ©2013
Page 11
100 Thomas Johnson Drive, Frederick, MD 21702-4600 USA
Phone (301) 663-1600 • 1-800-638-3326
Fax (301) 663-1607 • 1-800-447-3326
Website: www.edcoinc.com
Email: [email protected]
Repairs are to be
done by authorized
EDCO DEALERS only. Read and follow instructions
in the Engine Manufacturer’s
Manual
Maintenance Schedule
Inspect Drum Bushings
Before Operation
Every 4 Hours
Daily
Every 50 Hours
As Required
Follow Engine
Manufacturer’s
Maintenance
Schedule
X
X
X
X
X
X
X
X
X
X
Visual Inspection of
Entire Machine
Check Engine Oil
Grease Cutter
Assembly Bearings
Inspect Belts
(Tension after the fi rst 4 hours,
then as needed)
Change Engine Oil
(Refer to engine manual)
Clean Air Filter Element
Grease All Other Bear-
ings
Clean Off Machine
Inspect Cutter
Shafts & Wheels