EcoTech Marine EcoSmart Live - Manual (Page 10)

Adding a Missing Radion
Add Light(s) Via Wireless
There are circumstances where a Radion may not be inititally identified by the software. Adding missing
Radions can be corrected using the Group Manager.
Use Add Lights Via Wireless if you have a new Radion which you would like to add to a group.
• After selecting Add Lights Via Wireless, the EcoSmart Live site will look for new, unaddressed, Radi-
ons as well as send a query to confirm previously addressed Radions. All lights must be plugged in
and running within wireless range to complete correctly.
• Once the new Radions are displayed in the Available Lights column, you can add them to your
profile.
• In the event that no new Radions were discovered, you will be returned to the previous screen and
may launch the USB method using a direct connection to the Radion.
Add Light(s) Via Wireless
Selecting this option will search for missing Radions
using wireless commands across all previous versions
of firmware. All Radions must be connected to their
power supply and powered on.
Add Light(s) Via USB
Selecting this option will launch a series of on-screen
instructions which will step through the process of
plugging the USB cable into each light which is miss-
ing.
Discover Lights
A wireless query is sent out, all lights
which are within wireless range will
respond.
Retrieve Details
The device details are retrived for all
Radions which are discovered.
Return Available Lights
Once the device details have been
retrieved, the missing lights will be
listed as Available.
TIP!: This method is useful when adding
one or two lights.
TIP!: Firmware updates are much faster
using USB. This method can save a lot of
time if several lights require an update.