DVIGear DVI-3531a - Manual (Page 8)

-6-
5.1.1 Menu Navigation
Press the MENU/ENTER button to display the OSD menu. Once the menus are
displayed, the “+” and “-” keys are used to navigate through the menu. The “+”
will advance the curser forward (right) or down and the “-” will advance the curser
backwards (left) and up. Once the desired function has been chosen, press the
MENU/ENTER key to select the function. Once the function has been selected,
use the “+” and “-” key to increase or decrease the desired value, then press the
MENU/ENTER to save the adjustment. To exit the OSD menus use the “+” or “-”
key to scroll through the functions until the curser is on Exit and press the MENU/
ENTER key, or simply press the MENU/ENTER key repeatedly.
For remote control access, press the MENU key on the IR Remote Control unit
to display the OSD menus. Use the arrow keys to navigate through the OSD
menus. Once the function has been chosen, press the OK key to select it and
use the arrow keys to make the desired adjustment. Press the OK key to save the
adjustment. Press the EXIT key to escape from the OSD menus.
5.1.2 Menu Structure
The OSD Menu structure is as follows:
Main Menu
Video Menu Color Menu Output Menu OSD Menu Info Menu
Contrast User VGA H-Position Input
Brightness Normal SVGA V-Position Output
Hue Warm XGA Time Out Version
Sat Cool SXGA Background
Sharpness UXGA Exit
Picture Mode WXGA
Scale WSXGA
NR WUXGA
H-Position 1 480i
V-Position 1 480p
Exit 576i
576p
PC Menu 2 720p (50/60)
Contrast 1080i (50/60)
Brightness 1080p (50/60)
Clock Native
Phase
H-Position 1
V-Position 1
Exit
Note 1: H-Position and V-Position are only present when Component Video or PC modes
are selected.
Note 2: The PC menu is only active when the PC Input is selected as the source.