DVIGear DVI-23xx-FO - Manual (Page 7)

2 .1 Specifications (continued)
Power Requirements
Source Power
Requires at least 350 ma of DC current from pin 14 of DVI (source)
connector. Optional external power supply may be used if needed.
Optional External AC Power Adapter Input: 100-240VAC / 50-60Hz 0.2A Output: +5VDC, 0.5A (min.)
Power Consumption Maximum: 1.8 watts
Regulatory Approvals
Fiber Optic Cable
FCC, CE, RoHS
AC Power Adapter (optional) FCC, CE, UL, C-UL, CEC, GS, PSE, RoHS
Warranty
Limited Warranty
3 Years Parts and Labor
Model Number
DVI-23xx-FO
DVI / HDMI Fiber Optic Cable ( xx = length in meters )
Accessories Included
1x User Guide
Optional Accessories
DVI-7210-PS External AC Power Adapter (with USA, Euro, UK, or Australia plugs)
DVI-8511b DVI-I Female to HDMI Male Adapter Cable
DVI-2300-CVR DVI / HDMI Fiber Optic Cable Protective Cover
3 .0 PACKAGE CONTENTS
Before attempting to use this unit, please check the packaging and make certain
the following items are contained in the shipping carton:
• 1x DVI-23xx-FO DVI / HDMI Fiber Optic Cable
• 1x User Guide
Note: Please retain the original packing material should the need ever arise to return the unit.
If you find any items are missing, contact your reseller or DVIGear immediately. Please have
the Model Number, Serial Number and Invoice Number available for reference when you call.
4 .0 CONNECTING THE HARDWARE
The DVI-23xx-FO cable consists of a transmitter module (labeled “Computer”) and
a receiver module (labeled “Monitor”) integrated with the cable. The transmitter
module converts the DVI or HDMI input signals into light pulses for transmission
over 4x Multi-Mode glass fibers, and the receiver module converts the light pulses
back to a DVI or HDMI signal for display on a monitor or projector. The transmitter
module should be connected to the output port of the signal source (such as a
PC). The receiver module should be connected to the input port of a digital
display. This product may be connected to an HDMI source and/or display using
a DVI Female to HDMI Male Adapter Cable (DVIGear part number DVI-8511b).
-5-
The cable material provides a high degree of ruggedness and flexibility and
consists of 4x high-speed glass optical fibers and 6x copper wires. Note that
the video signals travel over the glass fibers and are UNIDIRECTIONAL. The
other signals (DDC, HPD, power, etc.) travel over the copper wires.
Warning: This cable will not function if it is installed backward. Always connect the transmitter
module (Computer) to the source device and the receiver module (Monitor) to the display.
Optical Cables
MMF (50/125 µm) Glass Fiber
Buffer (650 µm) PVC
Aramid yarn
Inner Jacket (2.8 mm) PVC
Signal Cables
Tinned Conductor 24 AWG (0.203/7)
Insulated Jacket (1.08 mm) PVC
Power / Ground Cables
Tinned Conductor 0.75SQ (0.18/30)
Insulated Jacket (2.5 mm) PVC
Drain Wire
0.203/7 24AWG
Cable Jacket
AL-Mylar Shield
Outer Jacket (7.2 mm) PVC
Cross-Sectional View