DVIGear DVI-7311 - Manual

DVI-7311
Single-Link DVI
Fiber Optic Extender, 4x LC Quick Start Guide
Introduction
DVI-7311 is a Fiber Optic Extender designed to transmit single-link DVI signals over optical fiber
cables at distances up to 500 meters (1,640 ft.). This extender provides exceptional signal fidelity and
supports a wide range of input resolutions. The unit consists of an optical transmitter module that
converts the DVI input signal into high-speed light pulses for transmission over four (4) detachable
multi-mode glass fibers and an optical receiver module that converts the light pulses back to a DVI
signal for display on a monitor or projector. A programmable memory chip in the transmitter unit
captures and stores the EDID from the connected display, thereby eliminating the need for copper
cables. These features make the DVI-7311 the ideal solution for any application that demands
flawless image quality from DVI signals that must be extended over very long cable distances.
Typical Application
DVI-7311 Single-Link DVI Fiber Optic Extender, 4x LC
1
DVI-7311-RX
Receiver
DVI Port
DVI-7311-TX
Transmitter
DVI Port
1 2 4 3 1 2 4 3
AC Power
Adapter
1
2
3
4
Optional
AC Power
Adapter