DVIGear DVI-7360 - Manual (Page 6)

-4-
3. PACKAGE CONTENTS
Before starting installation, please check the package contents:
• 1x DVI-7360-Tx Transmitter Unit
• 1x DVI-7360-Rx Receiver Unit
• 1x IR Transmitter
(p.n. DVI-7360-IR-TX)
• 1x IR Receiver (p.n. DVI-7360-IR-RX)
• 2x External AC Power Adapters (p.n. DVI-7205-PS)
• 1x User Guide
4. INSTALLATION
This product includes both a Transmitter and a Receiver unit. The Transmitter
unit should be connected to the HDMI output port of the signal source (such
as a PC or BluRay player). The Receiver should be connected to the HDMI
input port of a digital display. This product may be connected to a DVI source
and/or display using a DVI to HDMI cable (DVIGear p.n. DVI-24xx-HR, where
xx = length in meters).
The HDMI signal components are routed from the Transmitter unit to the
Receiver unit using an optical cable with two (2) fibers that are terminated with
LC optical connectors. The optical cable may use either single-mode or multi-
mode fiber. The longest cable distances may be obtained with single-mode
fiber. Systems that require HDCP support are limited to cable distance of 350
meters (1,150 ft.).