DVIGear DVI-7320 - Manual (Page 5)

-3-
3. SPECIFICATIONS
General Specifications
Maximum Pixel Clock Rates
up to 330 MHz
Maximum Bit-Rates up to 1.65 Gbps. per TMDS channel
Maximum Supported
Resolutions
Single-Link Mode: up to 1920x1200, 1600x1200, 2048x1080
Dual-Link Mode: up to 3840×2400
Connector Types
DVI Ports: 29-pin DVI female connectors
Optical Ports: LC optical connectors
DDC Port: RJ-45 Jack
DC Power: Ø 5.5 x 9.5mm x Ø 2.5mm
Optical Specifications
Optical Transmitter
850nm VCSEL Laser
Optical / Electrical Converter GaAs PIN Photo Diode
Suggested Fiber Optic Cable 50(62.5)µ / 125µ multi-mode fiber with 7x LC connectors
DVIGear Fiber Optic Cable
Plenum Rated (OFNP), Outdoor Rated, Black Jacket, O.D. = 6.2mm,
50µ/125µ multi-mode fiber with 8x LC optical terminations
Maximum Cable Length
Real EDID Mode: 328 ft. (100 meters)
EDID Emulation Mode: 1,640 ft. (500 meters)
DDC Support
EDID Support
The display’s EDID can be transmitted via the optional CAT5 DDC link.
It may also be stored in an EDID memory on the DVI-7320-Tx module.
HDCP Support HDCP communications are supported using optional CAT5 DDC link.
Power
Optical Transmitter
DVI-7320-Tx requires 300 ma DC current from pin 14 of DVI (source)
connector. An optional external power adapter may be used if needed.
Optical Receiver Must be powered using the supplied external AC power adapter
External AC Power Adapter Input: 100-240VAC, 50-60Hz 0.5A Output: +5VDC @ 2.0A
Power Consumption DVI-7320-Tx: 1.5 watts DVI-7320-Rx: 1.5 watts
Mechanical
Dimensions (L x W x H)
7.05” x 3.56” x 1.31” (179.1 mm x 90.3 mm x 33.3 mm)
Net Weight DVI-7320-Tx: 1.02 lb. (462 g) DVI-7320-Rx: 1.02 lb. (462 g)
Mounting An optional Wall / Desk Mount Bracket is available, p.n. DVI-7320-WM
Environmental Specifications
Operating Temperature Range
32° to 122° F. / 0° to 50° C.
Storage Temperature Range -4° to 158° F. / -20° to 70° C.
Humidity (Operating / Storage) 10 - 80%
Regulatory Approvals
Optical Extender
FCC, CE, RoHS
Power Supply UL, CUL, CE, PSE, GS, RoHS