beautypg.com

Starting, Selection of engine oil for flexible fuel, Vehicles (e-85) and gasoline vehicles – Dodge 2011 Ram User Manual

Page 452

background image

• you do not add less than 5 gallons (19 Liters) when

refueling

• you operate the vehicle immediately after refueling for

a period of at least 5 minutes

Observing these precautions will avoid possible hard
starting and/or significant deterioration in driveability
during warm up.

NOTE:

• When the ambient temperature is above 90° F (32° C),

you may experience hard starting and rough idle
following start up even if the above recommendations
are followed.

• Some additives used in regular gasoline are not fully

compatible with E-85 and may form deposits in your
engine. To eliminate driveability issues that may be
caused by these deposits, a supplemental gasoline
additive, such as MOPAR

௡ Injector Cleanup or

Techron may be used.

Selection Of Engine Oil For Flexible Fuel Vehicles
(E-85) And Gasoline Vehicles
FFV vehicles operated on E-85 require specially formu-
lated engine oils. These special requirements are included
in MOPAR

௡ engine oils, and in equivalent oils meeting

Chrysler Specification MS-6395. The manufacturer re-
quires engine oils that are API Certified and meet the
requirements of Material Standard MS-6395. MS-6395
contains additional requirements, developed during ex-
tensive fleet testing, to provide additional protection to
Chrysler Group LLC engines. Use MOPAR

௡ or an

equivalent oil meeting the specification MS-6395.

Starting
The characteristics of E-85 fuel make it unsuitable for use
when ambient temperatures fall below 0°F (-18°C). In the
range of 0°F (-18°C) to 32°F (0°C), you may experience an
increase in the time it takes for your engine to start, and
a deterioration in driveability (sags and/or hesitations)
until the engine is fully warmed up.

450

STARTING AND OPERATING