Enabling and disabling parksenseĥ, Enabling and disabling parksense – Dodge 2011 Ram User Manual
Page 144
WARNING ALERTS
Rear Distance
(in/cm)
Greater than
79 in (200 cm)
79-39 in
(200-100 cm)
39-25 in
(100-65 cm)
25-12 in
(65-30 cm)
Less than
12 in (30 cm)
Audible Alert
Chime
None
Single 1/2
Second Tone
Slow
Fast
Continuous
Display Message
Park Assist ON
Warning Object
Detected
Warning Object
Detected
Warning Object
Detected
Warning Object
Detected
Arcs
None
3 Solid
(Continuous)
3 Slow
Flashing
2 Slow
Flashing
1 Slow
Flashing
Radio Mute
No
Yes
Yes
Yes
Yes
NOTE:
ParkSense
will MUTE the radio, if on, when
the system is sounding an audio tone.
Enabling And Disabling ParkSense
ா
ParkSense
can be enabled and disabled with a switch
located in the switch bank of the instrument panel or
through the Customer-Programmable Features section of
the EVIC. The available choices are: OFF, Sound Only, or
Sound and Display. Refer to “Electronic Vehicle Informa-
tion
Center
(EVIC)/Personal
Settings
(Customer-
Programmable Features)” in “Understanding Your In-
strument Panel” for further information.
When the ParkSense
switch is pressed to
disable the system, the instrument cluster will
display the “PARK ASSIST OFF” message for
142
UNDERSTANDING THE FEATURES OF YOUR VEHICLE