Dodge 2011 Ram - Manual (Page 277)

This feature allows an iPod
௡ to be plugged into the
vehicle’s sound system through a 16–pin connector, using
the provided interface cable.
iPod
௡ control supports Mini, 4G, Photo, Nano, 5G iPod௡
and iPhone ௡ devices. Some iPod௡ software versions may
not fully support the iPod ௡ control features. Please visit
Apple’s website for software updates.
NOTE:
• If the radio has a USB port, refer to the appropriate
Uconnect Multimedia radio user’s manual for iPod or
external USB device support capability.
• Connecting an iPod௡ to the AUX port located in the
radio faceplate, plays media, but does not use the
iPod
௡ control feature to control the connected device.
Connecting The iPod
ா
Use the provided connection cable to connect an iPod ௡ to
the vehicle’s 16–pin connector port (which is located in
the glove compartment on some vehicles). Once the
iPod
௡ is connected and synchronized to the vehicle’s
iPod
௡ control system (iPod௡ may take a few seconds to
connect), the iPod ௡ starts charging and is ready for use
by pressing radio switches, as described below.
NOTE:
• It may be necessary to remove the connector pin
protection cap from the 16–pin connector port, prior to
connecting the cable.
• If the iPod௡ battery is completely discharged, it may
not communicate with the iPod
௡ control system until
a minimum charge is attained. Leaving the iPod ௡
connected to the iPod ௡ control system may charge it to
the required level.
4
UNDERSTANDING YOUR INSTRUMENT PANEL 275