D.A.S. Audio SX-218A - Manual (Page 7)

INTRODUCTION
SETTINGS
SX-218A
- Powered subwoofer system
- 1800 W 3rd generation Class D amplifier
- Two 18SXN high performance loudspeakers
- Front loaded bass-reflex configuration
- Pole mount accessories
The SX-218A is a powered subwoofer system
designed to provide outstanding performance in terms
of output power, bandwith extension and distortion. The
SX-218A incorporates two 18SXN cone transducers.
The newly developed 18SXN loudspeakers are a
significant improvement over their predecessors offering
increased power handling, reduced distortion and power
compression.
The SX-218A which incorporates a new amplifier
(1800 W) design providing ample headroom and
accuracy. The amplifier uses a 3rd generation Class D
design and convection cooling from its sealed
enclosure. Thanks to the amplifiers high efficiency, no
forced ventilation is needed eliminating possible fan
failures. The automatic dual voltage selector ensures a
“no hassle” mains setup anywhere in the world.
The SX-218A enclosure is constructes of 18 mm
birch plywood finished with the durable ISO-Flex black
paint. The loudspeakers are protected by a perforated
steel grille sealed against corrosion using a powder coat
finish. A pole mount socket located on the top panel
provides flexibility when using full-ranges satellite
systems.
SX-218
- High performance subwoofer system
- Two 18SXN loudspeakers
- Front-loaded, bass-reflex configuration
- 18 mm plywood
- Finished with ISO-Flex durable black paint
The SX-218 is a high-power subwoofer system
designed to provide outstanding performance in terms of
output power, bandwidth extension and distortion. The
SX-218 incorporates two 18SXN cone transducers. The
newly developed 18SXN loudspeakers are a significant
improvement over their predecessors offering increased
power handling, reduced distortion and power
compression.
The SX-218 enclosure is constructed of 18 mm birch
plywood finished with the durable ISO-Fles black paint.
The rugged cabinet design employs extensive internal
bracing eliminating sound coloration due to panel
resonance. The loudspeakers are protected by a
perforated steel grille sealed against corrosion using a
powder coat finish. The
SX-218 is designed for use in
biamped systems with external amplification. A pole
mount socket located on the top panel provides flexibility
when using full-range satellite systems.
7 Manual del Usuario / SX-218 / User’s Manual
When low reforcement is required the D.A.S. subwoofer systems offer the right solution.
Ideal for fixed installations like pubs, disco and bars, and mobile applications.