D.A.S. Audio Artec 500 Series - Manual (Page 14)

Mounting AXU
Mounting AXF (only for Artec 508 & Artec 510 enclosures)
14 Manual del Usuario / artec 500 passive / User’s Manual
AXU series are designed for enclosures artec 506, artec 508, artec
510, artec 526 and different versions.
Introduction
The
Introduction
The
AXF series are designed for enclosures artec508, artec510 and
different versions.
Safety Precautions
Wall plugs provided are to be used in brick walls only. For other wall materials, source the suitable wall
plug before use.
D.A.S. Audio is not responsible for use other than the recommended or whether it be the result of
insufficient strength of the support structure. Use only the screws and wall plugs supplied on surfaces that
will provide sufficient support. Do not use on surfaces such as plaster, and gypsum. It is highly
recommended and in most parts of the world mandatory, that a safety cable be used to secure the enclosure
to the structure.
To ensure optimum safety, the installation should be checked thoroughly at regular intervals replacing all
deteriorated elements.
Loosen the screws before reorienting the speaker. Never force the rigging elements.
Contact a licensed rigger if there is any doubt.
Mounting instructions
You can consult the AXU mounting instructions for artec500 series on
the web: www.dasaudio.com
Mounting instructions
You can consult the AXF mounting instructions for enclosures artec 508
and artec 510 on the web: www.dasaudio.com