D.A.S. Audio Aero 50 User Manual

Page 8

SYSTEM DESCRIPTION

LINE DRAWINGS

æro series

aero

LX-218C

LX-218CR

(rigging),

DSP-4080

æro series

DSP-4080

aero 50

LX-218C

and

LX-218CR

aero

aero 50

PL-50

LX-

218CR

PL-

LX218C

PL-218CS,

LX-218C

PL-218CS

KITW-100

The D.A.S. Audio

offers units for

applications requiring precise control of the vertical
coverage and high sound pressure levels. The

is an externally powered, three-way, high

efficiency line array module which integrates two
15” low frequency units with 4” voice coils, four 8”
mid-range devices which utilize 2.5” voice coils
and two compression drivers with 3” coils and 1.5”
exit geometry in a single unit. The compression
drivers are coupled to two Serpis high frequency
plane wave adaptors insuring coherent high
frequency summing and the generation of a flat,
isophasic wave front. When increased sound
pressure level in the low frequency range is
required, the system can be used in conjunction
with the

(stacking) or the

subwoofer units (

LX series manual for more

information).

These systems are ideal for applications such

as large-scale outdoor/indoor events in arenas,
stadiums or theaters. Use of the

digital

processor is recommended for the

systems

digital processor

with the

will adversely affect the sound

quality and may damage system components.

The loudspeakers used in the system feature

advanced technologies; new TAF (total air flow)
cooling systems, Neodymium magnetic circuits
which allow for important weight reductions,
titanium diaphragms for the high frequency
sections,

and

low-mid

frequency

cones

manufactured using crossed fibers and elastic
suspension that provide exceptional stability in the
vertical plane.

The model

aero 50 includes two 15GNR, 15”

cone transducer with 4” EFW voice coils and
Neodymium magnet assemblies in a bass-reflex
configuration.

. Not using the

These units are manufactured using 15/18 mm

Finnish Birch plywood. The

enclosure

shape is trapezoidal with 5º angles. The

enclosures are rectangular. The

system incorporates captive rigging hardware

which is compatible with one another and
designed to provide a fast, simple and safe rigging
by means of quick release safety pins. Splay
angles can be changed from 0º to 3.2º in 0.8º
increments and from 3.2º to 9.6º in 1.6º
increments.

To facilitate transport, the

units are

equipped with a

front dolly panel attached

by means of the rigging hardware. The front dolly
panel is useful when rigging systems. The

units can be moved by way of the

front dolly panel attached by means of the

rigging hardware or by way of the

a dolly

for vertically stacking (up to 3 units). The
units can be moved by way of the

. Also

an accessory,

(caster kit), is available.

Four

8MN, 8” speakers arranged on a V shape,

incorporating 2.5” EFW voice coils, Neodymium
magnet assemblies and TAF cooling system are
used for mid-range reproduction. High frequencies
are handled by two

M-75N high frequency

compression drivers with 3” EFW coil, Neodymium

magnet and 1.5” exit coupled to twin

serpis plane

wave guide, designed by DAS Audio.

The

serpis plane wave adaptor also serves as

a heat sink for the compression driver.

aero 50

ALL DIMENSIONS IN MILIMETERS

1350

592

Manual del Usuario

/ aero 50 / User’s Manual