D.A.S. Audio WR Systems - Manual (Page 9)

TECHNICAL SPECIFICATIONS
R RMS (Average) Power Handling :
P Program Power Handling :
K Peak Power Handling :
On-axis Frequency Range (-10dB):
z Nominal Impedance :
z Minimum Impedance :
On-axis Sensitivity, 1w/1m :
Rated Peak SPL at full power:
Nominal -6dB Beamwidths:
Enclosure Material:
Color/Finish:
Transducers/Replacement Parts:
Grille:
Connector:
Dimensions (H x W x D):
Net Weight:
Optional Accessories:
T Nominal Power :
On-axis Frequency Range (-10dB):
Nominal Impedance:
Minimum Impedance:
S On-axis Sensitivity 1w/4m :
M Measured Maximum SPL at 4m :
C Horizontal Coverage Angles (-6dB) :
C Vertical Coverage Angles (-6dB) :
Enclosure Material:
Color/Finish:
Transducers/Replacement Parts:
Environmental Type:
Environmental Performance:
Grille:
Connector:
Dimensions (H x W x D):
Net weight:
Optional Accessories:
200 W
400 W
800 W
70 Hz - 22 kHz
16 Ohms
13.6 Ohms @ 200Hz
93 dB SPL
122 dB SPL
80º x 80º
Birch Plywood
CX, Black or White/Polyurea
DX, Military Grey or Black/
Fiberglass
LF: 2 x 6B/6B
HF: M-1/M-1
Stainless steel
Barried Strip
54,5 x 22,6 x 26,7 cm
21,5 x 8,9 x 10,5 in
10 kg (22 lb)
AXU-WR8826, AXW-1
200 W
70 Hz - 22 kHz
8 Ohms
6,7 Ohms @ 8320 Hz
75,3dB
97,05 dB
500Hz, 194º. 1kHz, 123º.
2kHz, 108º. 4kHz, 85º.
500Hz, 85º. 1kHz, 35º.
2kHz, 35º. 4kHz, 75º.
Birch Plywood
CX, Black or White/Polyurea
DX, Military Grey or Black/
Fiberglass
LF: 2 x 6B/6B
HF: M-1/M-1
Type B
EN 60529 IP 56
Stainless steel
Barried Strip
54,5 x 22,6 x 26,7 cm
21,5 x 8,9 x 10,5 in
10 kg (22 lb)
AXU-WR8826, AXW-1
T Nominal Power based on a 100h test using a 6dB crest factor pink noise signal filtered according to the IEC 60268-1:1985 norm and band-pass filtered with Butterworth 24dB/Oct
filters from 89Hz to 11,2kHz.
S Sensitivity and Max SPL measured using a 6dB crest factor pink noise, averaged from 100Hz to 10kHz in 1/3 Octave bands.
C coverage measured from 500Hz to 4kHz in Octave bands.
R Based on a 2 hour test using a 6dB crest factor pink noise signal.
P Conventionally, 3dB higher than the RMS measure, although this already, utilizes a program signal.
K R Corresponds to the signal crests for the test described in .
M Obtain from a time window of a 30 seconds.
z Impedance of a frequency range of 20 Hz - 2 kHz for better optimization of amplifiaction devices,
WR-8826
WR-8826
WR-6415
WR-6415
WR-6412
WR-6412
EN54-24 Based Technical Specifications
Technical Specifications
400 W
800 W
1600 W
55 Hz - 20 kHz
8 Ohms
8 Ohms at 133 Hz
99 dB SPL
131 dB SPL
60º x 40º Rotatable
Birch Plywood
CX, Black or White/Polyurea
DX, Military Grey or Black/
Fiberglass
LF: 15AV/GM 15P
HF: M-75/GM M-75
Stainless steel
Barried Strip
77 x 46,2 x 45,5 cm
30,3 x 18,2 x 17,9 in
28 kg (61,6 lb)
AXU-WR6415
300 W
55 Hz - 20 kHz
8 Ohms
8 Ohms @ 133 Hz
82dB
107 dB
500Hz, 120º. 1kHz, 84º.
2kHz, 60º. 4kHz, 60º
500Hz, 127º. 1kHz, 105º.
2kHz, 54º. 4kHz, 40º
Birch Plywood
CX, Black or White/Polyurea
DX, Military Grey or Black/
Fiberglass
LF: 15AV/GM 15P
HF: M-75/GM M-75
Type B
EN 60529 IP 56
Stainless Steel
Barried Strip
77 x 46,2 x 45,5 cm
30,3 x 18,2 x 17,9 in
28 kg (61,6 lb)
AXU-WR6415
400 W
800 W
1600 W
60 Hz - 20 kHz
8 Ohms
8,2 Ohms @ 135 Hz
98 dB SPL
130 dB SPL
60º x 40º Rotatable
Birch Plywood
CX, Black or White/Polyurea
DX, Military Grey or Black/
Fiberglass
LF: 12AV/GM 12P
HF: M-75/GM M-75
Stainless steel
Barried Strip
70 x 39 x 39 cm
27,6 x 10,4 x 10,4 in
24 kg (52,8 lb)
AXU-WR6412
300 W
60 Hz - 20 kHz
8 Ohms
8,2 Ohms @ 135Hz
82,5 dB
106,7 dB
500Hz, 135º. 1kHz, 92º.
2kHz, 70º. 4kHz, 65º.
500Hz, 144º. 1kHz, 122º.
2kHz, 57º. 4kHz, 42º.
Birch Plywood
CX, Black or White/Polyurea
DX, Military Grey or Black/
Fiberglass
LF: 12AV/GM 12P
HF: M-75/GM M-75
Type B
EN 60529 IP 56
Stainless steel
Undeterminated cable
70 x 39 x 39 cm
27,6 x 10,4 x 10,4 in
24 kg (52,8 lb)
AXU-WR6412
9