D.A.S. Audio Variant Series Manual - Manual (Page 10)

SPECIFICATIONS
VA-4T
VA-4T
VA-24T
VA-24T
R RMS (Average) Power Handling :
P Program Power Handling :
K Peak Power Handling :
On-axis Frequency Range (-10dB):
Nominal Impedance:
Minimum Impedance (LF):
Transformer Taps :
On-axis Sensitivity 1w/1m:
Rated Peak SPL at Full Power:
Nominal -6dB Beamwidths:
Enclosure Material:
Colour/Finish:
Transducers/Replacement Parts:
Connector:
Dimensions (H x W x D):
Weight:
Included Accessories:
Optional Accesorios:
T Nominal Power :
On-axis Frequency Range (-10dB):
Transformer Taps:
Nominal Impedance:
Minimum Impedance:
On-axis Sensitivity 1w/4m:
M Measured Maximum SPL at 4m :
Horizontal Coverage Angles (-6dB):
Vertical Coverage Angles (-6dB):
Enclosure Material:
Colour/Finish:
Transducers/Replacement Parts:
Environmental Type:
Environmentall Performance:
Connector:
Dimensions (H x W x D):
Net weight:
Included Accesories:
Optional Accessories:
T Nominal Power based on a 100h test using a 6dB crest factor pink noise signal filtered according to the IEC 60268-
1:1985 norm and band-pass filtered with Butterworth 24dB/Oct filters from 89Hz to 11,2kHz.
S Sensitivity and Max SPL measured using a 6dB crest factor pink noise, averaged from 100Hz to 10kHz in 1/3 Octave
bands.
C Coverage measured from 500Hz to 4kHz in Octave bands.
M Obtained by integration over a period of at least 30s.
R Based on a 2 hour test using a 6dB crest factor pink noise signal.
P Conventionally, 3dB higher than RMS measure, although this already, utilizes a program signal.
K R Corresponds to the signal crests for the test described in .
100 W
200 W
400 W
90 Hz - 22 kHz
8 Ohms
7,8 Ohms @ 290 Hz
Tap0, Low Z. Tap1, 10w.
Tap2, 20w. Tap3, 30w @ 100V.
Tap0, Low Z. Tap1, 5w.
Tap2, 10w. Tap3, 15w @ 70V.
89 dB SPL
115 dB SPL
80º Horizontal x 70º Vertical
High Impact ABS
Black or White
LF: 2 x 4G/4G
HF: TWT-24/TWT-24
Spring Loaded Terminals
34 x 15 x 15 cm
17,7 x 5,9 x 5,9 in
2,6 kg (5,7 lb)
none
AXU-VA24
AXA-AC
100 W
90 Hz - 22 kHz
Tap0, 8 Ohms. Tap1, 10w. Tap2, 20w.
Tap3, 30w @ 100v.
Tap0, 8 Ohms. Tap1, 5w. Tap2, 10w.
Tap3, 15w @ 70v.
Tap0, 5,75 Ohm. Tap1, 700 Ohms.
Tap2, 350 Ohms. Tap3, 233 Ohms.
4,6 Ohms @ 9380 Hz
74,53dB
88,77 dB SPL
500Hz, 360º. 1kHz, 180º.
2kHz, 133º. 4kHz, 90º
500Hz, 147º. 1kHz, 68º.
2kHz, 46º. 4kHz, 82º
High Impact ABS
Black or White
LF: 2 x 4G/4G
HF: TWT-24/TWT-24
Type B
EN 60529 IP 54
Spring Loaded Terminals
34 x 15 x 15 cm
17,7 x 5,9 x 5,9 in
2,6 kg (5,7 lb)
none
AXU-VA24
AXA-AC
50 W
100 W
200 W
90 Hz - 22 kHz
8 Ohms
6,9 Ohms @ 275 Hz
Tap0, Low Z. Tap1, 5w.
Tap2, 10w. Tap3, 15w @ 100V.
Tap0, Low Z. Tap1, 2,5w.
Tap2, 5w. Tap3, 7.5w @ 70V.
86 dB SPL
109 dB SPL
90º x 90º
High Impact ABS
Black or White
LF: 4G/4G
HF: TWT-4/TWT-4
Spring Loaded Terminals
21 x 14 x 14 cm
8,7 x 5,5 x 5,5 in
1,6 kg (3,6 lb)
none
AXU-VA4
AXA-AC
45 W
90 Hz - 22 kHz
Tap0, 8 Ohms. Tap1, 5w. Tap2, 10w.
Tap3, 15w @ 100V
Tap0, 8 Ohms. Tap1, 2,5w. Tap2, 5w.
Tap 3, 7,5w @ 70v
Tap0, 6 Ohms. Tap1, 1125 Ohms.
Tap2, 526 Ohms. Tap3, 375 Ohms.
4,8 @ 11,5 kHz Ohms
72,4dB at 1w/4m,
84,95 dB
500Hz, 360º. 1kHz, 182º.
2kHz, 113º. 4kHz, 84º.
500Hz, 360º. 1kHz, 165º.
2kHz, 107º. 4kHz, 80º
High Impact ABS
Black or White
LF: 4G/4G
HF: TWT-4/TWT-4
Type B
EN 60529 IP 54
Spring Loaded Terminals
21 x 14 x 14 cm
8,7 x 5,5 x 5,5 in
1,6 kg (3,6 lb)
none
AXU-VA4
AXA-AC
10
Manual del Usuario / VA series / User’s Manual
EN54 based technical specifications