Cymatic Audio uTrack 24 Manual User Manual

Page 21

PRODUCT MANUAL

UPDATING THE FIRMWARE OF YOUR UTRACK 24

5. Click the green “Start” button and after a moment this screen will appear:

6. Locate the Firmware Update file you previously saved to your hard disk and either drag and

drop it onto the orange SELECT FILE button or click the SELECT FILE button and select the

file with the file browser that opens.

7. Click the green “UPLOAD FIRMWARE” button that appears. The update process starts and

you will see the following screen:

8. After the update has successfully finished, your browser will show the following:

9. Click the green “REBOOT” button. The connected uTrack 24 will reboot which concludes the

update process. The screen will show the version number of the updated firmware.