beautypg.com

Crown Verity MCB72-P User Manual

Page 5

background image

3

SETTING-UP REMOTE PROPANE CYLINDERS

*MAXIMUM INDIVIDUAL CYLINDER CAPACITY: 100 LBS. PROPANE *

Cylinders installed and connected for use with an MCB-P shall be located and installed in
a safe location and in a secure manner.

Propane cylinders must be located and secured against tip-over:

10 feet from the char-broiler itself and any other sources of ignition such as

electrical equipment, vehicles and other fuel burning appliances or equipment, building
intakes and exhausts

All propane cylinders connected for use shall be secured against accidental

tipping by attaching them to a suitable object with a rope, chain, strap or other
suitable device. Crown Verity Inc. offers a specialized cylinder retaining cart that
addresses all tipping issues. Please contact your dealer and inquire about the RPS
cart. The plastic cylinder base ring that is supplied with the MCB-P is only
suitable for cylinders with a maximum capacity of 20 lbs. LP and does not
negate the necessity to provide additional security against tip-over.

Hose(s) connected for use to LP cylinders shall be safely routed to provide

maximum protection from contact with hot, sharp or abrasive surfaces and areas,
from vehicular, pedestrian and mechanical damage

• Crown Verity Inc. recommends cordoning-off the area of the cylinder(s), hose(s) and

the char-broiler with barricades, bright marker tape or similar. Do not route hoses
across evacuation/emergency, pedestrian or vehicle routes.

Any temporary propane supply system must be installed in accordance with local codes
or, in the absence of local codes: ANSI/NFPA 54 1999/ANSI Z 223.1 1999 National
Fuel Gas Code, or CSA B.149.2: Propane Installation code.

Consult your local propane distributor, fire prevention agency, safety authority and exhibit
officials for installation requirements. Additional requirements other than those listed in
this manual may be required.

Recommendations listed in this instruction manual are considered to be minimum
safety requirements.

CROWN VERITY INC., 37 ADAMS BLVD., BRANTFORD, ON. CAN. N3S 7V8

TEL: (519) 751-1800

FAX: (519) 751-1802

www.crownverity.com

Email: [email protected]

This manual is related to the following products: