CREATIVE Desktop Wireless 8000 - Manual (Page 37)

Troubleshooting B-3
The cursor moves erratically and/or some characters appear on the
screen when you are not using the mouse or keyboard.
There may be some interference from other nearby computers. This may be due to
similar radio frequencies being used in some systems.
Do the following:
• Change the default device channel.
a. Press the Connect button on the RF receiver.
b. Press the Connect button on the mouse or keyboard.
For more information on the radio frequency, refer to "Technical
Specifications" on page A-1.
• Change the default device ID.
a. Press the Connect button on the RF receiver.
b. Press and hold the Connect button on the mouse or keyboard for at least
two seconds.