Crestron electronic DTT-17 - Manual (Page 9)

UPX & DIGITAL VIDEO PROCESSORS
15" DualTouch™ Technology Touchpanel
DTT-15V2
UPX Universal Presentation System
The DTT-15V2 is a 15" touchpanel designed for use with the
UPX-2 Universal Presentation System to support all of the
control capabilities of a Crestron touchpanel, plus pen-based
annotation and computer-based multimedia presentation.
DualTouch TM Technology—This Crestron exclusive
combines fingertip operated touchpanel control with a
precision drawing tablet to produce an amazingly flexible
presentation solution. Crestron DualTouch Technology
touchpanels employ a brilliant combination of analog resistive
touch sensing for fingertip-operated touchpanel control and
Wacom ® Penabled™ technology for precise drawing and
annotation.
DualTouch Technology allows the presenter to touch the
screen with a fingertip to control AV and lighting functions,
and then on-the-fly annotate freely over video and graphic
presentation sources using the wireless pen provided.
Switching between modes is automatic and instantaneous,
disabling the analog membrane whenever the pen is sensed
allowing the palm of the hand to be rested naturally on the
screen while drawing.
Versatile Installation Options—The DTT-15V2 ships
complete with tilt stand, annotation pen, pen tether,
cables, and power supply. The adjustable stand allows
the touchpanel to be tilted between 15 and 72 degrees
for optimal comfort while annotating. An integral security
slot enables securing the touchpanel using a Kensington ®
compatible security cable (not included). Additional
installation options are possible using any third-party
VESA mounting compliant solution.
The Ultimate Presenter's Interface
15" LCD color touchscreen display
1024 x 768 XGA resolution
Provides the perfect front end for Crestron's UPX-2 Universal
Presentation System Processor
DualTouch Technology - Delivers a seamless combination of
touchpanel control and pen-based annotation
Ergonomic Design - Allows more natural drawing capability
than ordinary touchpanels
Includes tilt stand, wireless annotation pen, and power supply
SPECIFICATIONS
Touchscreen Display
Display: TFT active matrix color LCD
LCD Screen Size: 15 inch (38.1 cm) diagonal
LCD Active Area: 11.9 in x 8.9 in
Resolution: 1024 x 768 pixels (XGA)
Color Depth: 16.7 million (24 bit)
upx & dvp
Contrast Ratio: 250:1
Brightness: 200 nits (cd/m
2 )
Viewing Angle: ±80° horizontal, ±80° vertical
Touchscreen: Resistive membrane
Pen
Pen Pressure: 512 levels
Pen Switches: Side rocker switch (assignable)
Accuracy: ±1 pixel
Reading Height: 0.2 in (0.5 cm) maximum
Report Rate: 93 points per second
Reading Technology: Electro-magnetic resonance
Connectors
RGB IN: (1) DB15HD female, RGB (VGA) video input
Connects to RGB Output A of UPX-2 using 6.5 ft (2.0 m) DB15HD
VGA cable (included)
RGB OUT: (1) DB15HD female, RGB (VGA) video loop-thru
Passes RGB input through to an additional display device
USB: (1) USB B female, USB 2.0 port
Connects to any USB port on UPX-2 using 6.5 ft (2.0 m) USB
cable (included)
DC IN: (1) DC power jack (power supply included)
Controls
MENU, -, +, ENTER: (4) Pushbuttons to navigate onscreen
setup menu
POWER: (1) Pushbutton turns unit on/off
LED Indicators
STATUS: (Blue) Indicates sensing of annotation pen
POWER: (Dual-color) Blue indicates power is on with a valid
RGB input signal connected; turns amber when RGB signal
is disconnected
Power Requirements
Touchpanel: 24 watts (2.0 Amps) @ 12 Volts DC
External Power Supply (included): 100-240 Volts AC, 50-60 Hz
www.crestron.com | 800.237.2041 | 201.767.3400
© 2007 Specifications subject to change without notice
197
> continued