Crestron electronic DTT-17 - Manual (Page 7)

UPX & DIGITAL VIDEO PROCESSORS
17" DualTouch™ Technology Touchpanel
DTT-17
UPX Universal Presentation System
The DTT-17 is a 17" touchpanel designed for use with the
UPX-2 Universal Presentation System* to support all of the
control capabilities of a Crestron touchpanel, plus pen-based
annotation and computer-based multimedia presentation.
DualTouch™ Technology—This Crestron exclusive
combines fingertip operated touchpanel control with a
precision drawing tablet to produce an amazingly flexible
presentation solution. Crestron DualTouch Technology
touchpanels employ a brilliant combination of analog
resistive touch sensing for fingertip-operated touchpanel
control and Wacom ® Penabled™ technology for precise
drawing and annotation.
DualTouch Technology allows the presenter to touch the
screen with a fingertip to control AV and lighting functions,
and then on-the-fly annotate freely over video and graphic
presentation sources using the wireless pen provided.
Switching between modes is automatic and instantaneous,
disabling the analog membrane whenever the pen is sensed
allowing the palm of the hand to be rested naturally on the
screen while drawing.
Versatile Installation Options—The DTT-17 ships
complete with tilt stand, annotation pen, pen stand,
cables, and power supply. The adjustable stand allows
the touchpanel to be tilted between 15 and 72 degrees
for optimal comfort while annotating. Additional installation
options are possible using any third-party VESA mounting
compliant solution.
The Ultimate Presenter's Interface
17" LCD color touchscreen display
1280 x 1024 SXGA resolution
Provides the perfect front end for Crestron's UPX-2 Universal Presentation
System Processor*
DualTouch Technology - Delivers a seamless combination of touchpanel
control and pen-based annotation
Ergonomic Design - Allows more natural drawing capability than
ordinary touchpanels
Includes tilt stand, wireless annotation pen, and power supply
SPECIFICATIONS
Touchscreen Display
Display: TFT active matrix color LCD
LCD Screen Size: 17 inch (43.2 cm) diagonal
LCD Active Area: 13.30 in x 10.65 in (33.79 cm x 27.03 cm)
Resolution: 1280 x 1024 pixels (SXGA)
Color Depth: 16.2 million (18 bit + FRC)
Contrast Ratio: 450:1
Brightness: 240 nits (cd/m
2 )
upx & dvp
Viewing Angle: ±70° horizontal, ±70° vertical
Touchscreen: Resistive membrane
Pen
Pen Pressure: 512 levels
Pen Switches: Side rocker switch (assignable)
Accuracy: ±1 pixel
Reading Height: 0.4 in (1.02 cm) maximum
Report Rate: 133 points per second
Reading Technology: Electro-magnetic resonance
Connectors
RGB IN: (1) DVI-I female, RGB (VGA) video input
Connects to RGB Output A of UPX-2 using 6.5 ft (2.0 m) DVI-to-VGA
cable (included)
USB: (1) USB B female, USB 2.0 port
Connects to any USB port on UPX-2* using 6.5 ft (2.0 m) USB
cable (included)
SERIAL: (not used)
DC IN: (1) DC power jack (power supply included)
Controls
MENU, -, +, ENTER: (4) Pushbuttons to navigate onscreen
setup menu
POWER: (1) Pushbutton turns unit on/off
LED Indicators
STATUS: (Blue) Indicates sensing of annotation pen
POWER: (Dual-color) Blue indicates power is on with a valid
RGB input signal connected; turns amber when RGB signal
is disconnected
Power Requirements
Touchpanel: 45 watts (3.75 Amps) @ 12 Volts DC
External Power Supply (included): 100-240 Volts AC, 50-60 Hz
www.crestron.com | 800.237.2041 | 201.767.3400
© 2007 Specifications subject to change without notice
195
> continued