COMEUP Compact Winch (Ver:00) - Manual (Page 11)

V. Working Method
9
Power Core Insertion
Cords Sections
Insert the power plug into the power
receptacle of the winch, and tighten it by
turning the locking ring, clockwise. Be sure
to lock the cord by a hook. Do not allow the
cord to be caught by wire rope and drum.
The length for power cord or switch cords are subject to the distance of 20 meter, for any
other cases, the cords should use a bigger section by 3.5 mm 2 or a magnetic control box should
be suggested to prevent a considerable voltage drop to be happened.
Grounding
To prevent the risk of electric shock, the power plug must be plugged into a matching
outlet and grounded in good condition.
Up and Down Switching
To lift a load, press ↑ button and drum will rotate as shown below operation.
To lower a load, press ↓ button and drum will rotate as shown below.
To stop winching, release ↑or ↓ button.
To have an emergency stop function, press the emergency stop button (option). Rotate the
button clockwise for returning.
Locking ring
Plug
Hook
Winch model Lifting capacity Power Cord Switch Cord
CWL-80 80 kg 1.5 mm 2 x 3C x 3 m 1.25 mm 2 x 6C x 3 m
CWL-200/200L 200 kg 1.5 mm 2 x 3C x 3 m 1.25 mm 2 x 6C x 10 m
CWL-301/301L 300 kg 3.5 mm 2 x 3C x 0.6 m 2.0 mm 2 x 6C x 10 m
Up button
Wire drum Rotation
(Lifting direction)
UP
OIL OIL OIL OIL
Up button
Wire drum Rotation
(Lifting direction)
UP
OIL OIL OIL OIL
Winch Model Pendant switch, Standard Pendant switch w/an emergency stop, Option
CWL-80 CPB-413, 16A 2a1b PB-316A, 16A 2a1b
CWL-200/200L CPB-313, 16A 2a1b PB-317, 2a1b + Emergency Stop 1a1b
CWL-301/301L CPB-313, 16A 2a1b PB-317, 2a1b + Emergency Stop 1a1b