To lock the vehicle – Chrysler 2015 200 - User Guide User Manual
Page 15

To Lock The Vehicle:
The driver front door handle has the LOCK button located on the outside of the handle. With one of
the vehicle’s Keyless Enter-N-Go™ Key Fobs located outside the vehicle and within 5 ft (1.5m) of the
driver's front door handle, push the door handle LOCK button to lock all four doors and decklid.
Do NOT grab the door handle, when pushing the door handle lock button. This could unlock the
door(s).
NOTE:
• If “1st Press Of Key Fob Unlocks All Doors” is programmed all doors will unlock when you grab
hold of the driver front door handle. To select between “1st Press Of Key Fob Unlocks Driver
Door” and “1st Press Of Key Fob Unlocks All Doors,” refer to the “Uconnect® Settings” in your
vehicle’s Owner's Manual on the DVD or “Programmable Features” in this guide for further
information.
• If “1st Press Of Key Fob Unlocks All Doors” is programmed all doors and decklid will unlock
when you push the decklid button. If “1st Press Of Key Fob Unlocks Driver Door” is
programmed, only the decklid will unlock when you push the decklid button. To select
between “1st Press Of Key Fob Unlocks Driver Door” and “1st Press Of Key Fob Unlocks All
Doors,” refer to the “Uconnect® Settings” in your vehicle's Owner's Manual on the DVD or
“Programmable Features” in this guide for further information.
• After pushing the Keyless Enter-N-Go™ LOCK button, you must wait two seconds before you
can lock or unlock the vehicle using the door handle. This is done to allow you to check if the
vehicle is locked by pulling the door handle, without the vehicle reacting and unlocking.
Push The Button To Lock
Do NOT Grab The Handle When Locking
G E T T I N G S TA R T E D
13