Chrysler 2014 300 SRT - User Guide User Manual

Page 93

2. Remove the console storage bin to access the Manual Park Release lever.

3. Using a small screwdriver or similar tool, fish

the tether strap up through the opening in
the console base.

4. Insert the screwdriver into the slot in the

center of the lever, and disengage the lever
locking tab by pushing it to the right.

5. While holding the locking tab in the disen-

gaged position, pull the tether strap to ro-
tate the lever up and rearward, until it locks
in place in the vertical position. The vehicle
is now out of PARK and can be towed.
Release the parking brake only when the
vehicle is securely connected to a tow
vehicle.

To Reset The Manual Park Release:

1. Push the latch (at the base of the lever, on

the rear side) rearward (away from the lever)
to unlatch the lever.

2. Rotate the Manual Park Release lever for-

ward and down, to its original position, until
the locking tab snaps into place to secure
the lever.

3. Pull up gently on the tether strap to confirm

that the lever is locked in its stowed position.

4. Tuck the tether strap into the base of the

console. Reinstall the console storage bin.

W H A T T O D O I N E M E R G E N C I E S