Chrysler 2014 300 SRT - User Guide - Manual (Page 103)

Component
Fluid, Lubricant, or
Genuine Part
Capacities
Automatic Transmission –
8 Speed Transmission
Use only MOPAR® ZF 8&9
Speed ATF™ Automatic Trans-
mission Fluid or equivalent.
Failure to use the correct fluid
may affect the function or per-
formance of your transmission.
—
Automatic Transmission –
5 Speed Transmission
Use only ATF+4® Automatic
Transmission Fluid. Failure to
use ATF+4® fluid may affect
the function or performance of
your transmission. We recom-
mend MOPAR® ATF+4® fluid.
—
Transfer Case
We recommend you use
MOPAR® BorgWarner 44–40
Transfer Case.
—
Axle Front
We recommend you use API
GL-5 SAE 75W90 Synthetic
Gear Lubricant.
—
Axle Rear
We recommend you use API
GL-5 SAE 75W140 Synthetic
Gear Lubricant.
—
Brake Master Cylinder
We recommend you use
MOPAR® DOT 3 and
SAE J1703. If DOT 3 is not
available, then DOT 4 is
acceptable.
—
Power Steering Reservoir
We recommend you use
MOPAR® Hydraulic Fluid or
equivalent meeting MS-11655,
such as Fuchs EG ZH 3044 or
Pentosin CHF 11s.
—
Fuel Selection – 3.6L Engine 87 Octane
19 Gallons (72 Liters)
(Approximate)
Fuel Selection – 5.7L Engine
87 Octane Acceptable.
89 Octane Recommended.
19 Gallons (72 Liters)
(Approximate)
M A I N T A I N I N G Y O U R V E H I C L E
101