Preparations for jacking – Chrysler 2014 300 SRT - User Guide User Manual

Page 80

5. Remove the fastener securing the jack.

6. Remove the scissors jack and lug wrench

from the spare wheel as an assembly. Turn
the jack screw to the left to loosen the lug
wrench, and remove the wrench from the
jack assembly.

Preparations For Jacking

1. Park the vehicle on a firm, level surface as far from the edge of the roadway as possible. Avoid

icy or slippery areas.

2. Turn on the Hazard Warning flasher.

3. Set the parking brake.

4. Place the shift lever into PARK.

5. Turn OFF the ignition.

6. Block the front and rear of the wheel diagonally opposite of the jacking position. For example,

if changing the right front tire, block the left rear wheel.

NOTE:
Passengers should not remain in the vehicle
when the vehicle is being jacked.

W H A T T O D O I N E M E R G E N C I E S