Chrysler 2014 300 SRT - User Guide - Manual (Page 104)

SRT
Component
Fluid, Lubricant, or
Genuine Part
Capacities
Engine Coolant – 6.4L Engine
We recommend you use
MOPAR® Antifreeze/Coolant
Ten Year/150,000 Mile For-
mula OAT (Organic Additive
Technology).
15.2 Quarts (14.4 Liters)
Includes heater and coolant
recovery bottle filled to
MAX level.
Engine Oil With Filter –
6.4L Engine
For best performance and
maximum protection under all
types of operating conditions,
the manufacturer only recom-
mends full synthetic engine oils
that meet the American Petro-
leum Institute (API) categories
of SN. The manufacturer rec-
ommends the use of Pennzoil
Ultra™ 0W-40 or equivalent
MOPAR® engine oil meeting
the requirements of Chrysler
Material Standard MS-12633
for use in all operating tem-
peratures.
7 Quarts (6.6 Liters)
Engine Oil Filter
We recommend you use
MOPAR® brand Engine Oil
Filters.
—
Spark Plugs – 6.4L Engine
We recommend you use
MOPAR® Spark Plugs
(Gap 0.043 in [1.1 mm]).
—
Automatic Transmission
Use only ATF+4® Automatic
Transmission Fluid. Failure to
use ATF+4® fluid may affect
the function or performance of
your transmission. We recom-
mend MOPAR® ATF+4® fluid.
—
Axle Rear
We recommend you use
MOPAR® Synthetic Gear
Lubricant SAE 75W–90
(API GL-5) (with MOPAR®
Friction Modifier – Hypoid
Gear Additive).
—
Power Steering Reservoir
We recommend you use
MOPAR® Power Steering
Fluid + 4, MOPAR® or ATF+4®
Automatic Transmission Fluid.
—
Fuel Selection – 6.4L Engine
Premium Unleaded 91 Octane
Only or higher.
19 Gallons (72 Liters)
(Approximate)
M A I N T A I N I N G Y O U R V E H I C L E
102