beautypg.com

Tail/stop, tail, turn signal lamp, and, Backup lamp – Chrysler 2006 300 SRT User Manual

Page 278

background image

CAUTION!

Do not touch the new bulb with your fingers. Oil
contamination will severely shorten bulb life. If the
bulb comes in contact with an oily surface, clean the
bulb with rubbing alcohol.

Tail/Stop, Tail, Turn Signal Lamp, and Backup
Lamp

1. Open the Trunk.

2. Remove two fasteners from the back of the tail lamp
assembly.

3. Pull back the trunk liner.

4. Remove the remaining fastener from the back of the
tail lamp assembly.

5. Push the electrical connector locking tab to the side.

278

MAINTAINING YOUR VEHICLE

This manual is related to the following products: