beautypg.com

Using the panic alarm, General information – Chrysler 2006 300 SRT User Manual

Page 20

background image

Using The Panic Alarm:
To turn the panic alarm feature ON or OFF, press and
hold the PANIC button on the transmitter for at least one
second and release. When the panic alarm is on, the
headlights and park lights will flash, the horn will pulse
on and off and the interior lights will turn on.

The panic alarm will stay on for 3 minutes unless you
turn it off by pressing the PANIC button a second time or
if the vehicle speed is 15 mph (24 km/h) or greater.

NOTE:

• The interior lights will turn off when the ignition is

switched to the ACC or ON position after the panic
alarm is activated. However, the exterior lights and
horn will remain on.

• When you turn off the panic alarm by pressing the

PANIC button a second time, you may have to be
closer to the vehicle due to the radio frequency noises
of the system.

To Turn Off “Flash Lights On Lock/Unlock”

NOTE:

The Flash Lights On Lock/Unlock feature can

be turned on or off. Refer to

ЉPersonal SettingsЉ in the

EVIC section of this manual.

General Information
This device complies with part 15 of the FCC rules and
RSS 210 of Industry Canada. Operation is subject to the
following conditions:

• This device may not cause harmful interference.
• This device must accept any interference received,

including interference that may cause undesired op-
eration.

If your Remote Keyless Entry transmitter fails to operate
from a normal distance, check for these two conditions.

1. A weak battery in the transmitter. The expected life of
the battery is a minimum of three years.

2. Closeness to a radio transmitter such as a radio station
tower, airport transmitter, and some mobile or CB radios.

20

THINGS TO KNOW BEFORE STARTING YOUR VEHICLE

This manual is related to the following products: