Listening to the radio – Timex T625B User Manual

Page 13

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

Listening to the Radio

Operating the Radio

1. Press the ®

Radio Button

once to turn on the radio. The display will show “On” before returning to the

clock display. The bottom of the display will show the digital radio frequency.

Note:

If the

0 Radio

Button is pressed more than once, the unit will enter the sleep mode, with the radio

operating on a timer. See

Sleeping to the Radio with Timer lor

more information about this feature.

2. Press the

0 Radio Band Button

to select a band. There are two different FM bands (to be used when

programming preset radio station settings) and one AM band.

3. Press the

0 Reverse/Tuning

0 Foeward/Tuning Button

to find a radio station. To scan the radio

stations, hold a button for about three seconds. The radio will rapidly advance to the next strong signal.

4. You may also use the

Memory Set

-6 Buttons

to select a preset radio station. See the Programming

Radio Station Memories section for instructions on programming radio station settings.

5. Adjust the volume using the @

Volume Buttons.

6. Press the

0 Off/Reset Button

to turn the radio off. The bottom of the display will show the calendar setting.

Programming Radio Station Settings

The radio features 18 programmable radio station settings so you can access your favorite stations quickly.

1. Tune to the first station you wish to program into your preset station settings.

2. Press and hold one of the six

0 Memory Set 1 -6 Buttons

to program the station into that memory slot.

When the unit beeps, the station setting has been saved.

3. Continue programming a total of 18 stations into memory: six each into the two FM bands and six into the

AM band. To edit a setting, simply program a new frequency into the memory

sfet

Antenna Information and Adjustment

- Extend the FM wire antenna to its full length and vary the direction to Its strongest signal.

AM - The AM bar antenna is located inside the cabinet. Rotate the unit to find the strongest AM signal.

Last Station Memory

The tuner always remembers the last station selected before the radio was switched off, and automatically selects
the station again when the radio is turned on.