Timex T625B - Manual (Page 10)

Auto-Set Time and Date Settings
This model is equipped with Auto-Set, meaning that the time and date have been programmed at the factory
and will already be set when you first plug in the model. Auto-Set will automatically adjust the clock and calendar
for daylight-saving time and leap years. Auto-Set is pre-programmed for Eastern Standard Time; if you do not
live in this time zone, you can easily switch the setting to one of six other time zones.
1. To change your time zone setting, press and hold the 0 CD Track/Zone Button. The current Auto-Set
Time Zone in the bottom of the display will flash for approximately ten seconds. The setting can only be
adjusted while flashing.
2. While the Auto-Set Time Zone is flashing, press the 0 Reverse and Forward Buttons to select your
time zone. The display will show each zone’s current time setting. There are seven zones to choose from:
Auto-Set Time Zones
Z01------- Atiantic Standard Time
Z02------ ► Eastern Standard Time
Z03------- Central Standard Time
Z04------ >- Mountain Standard Time
Z05------ ^ Pacific Standard Time
206------- Alaskan Standard Time
Z07------ ► Hawaiian Standard Time
3. Find your time zone and then press the 0 Enter Button, -or wait about ten seconds for the clock to beep
twice and the setting to lock into place.
Daylight-Saving Time and Leap Year Adjustments
This unit will automatically adjust the clock at the beginning and end of Daylight-Saving Time each year. It will
also automatically adjust the month/day display for leap years.
This unit automatically advances one hour at the start of Daylight-Saving Time on the first Sunday of April, and
moves back one hour at the end of Daylight-Saving Time on the last Sunday of October. If you live in an area
that does not observe Daylight-Saving Time, it will be necessary for you to manually adjust the clock back one
hour at the beginning of Daylight-Saving Time and forward' one hour at the end of Daylight-Saving Time.
10