Denon DRW-585 - Manual (Page 13)

ENGLISH
d) ®
® Load the tape onto which you want to record into deck B, the disc you
want to record into the CD player,
(D Following the recording instructions on page 10, set the Dolby NR
mode, the direction, the reverse mode and the input level.
( 3 ) Set the CD player to the stop or pause mode.
@ Press the REC/REC MUTE (•) button and REC PAUSE (II) button
simultaneously. The cassette deck and CD player are automatically set
to the synchronized recording mode. The "SYNC" indicator lights on
the cassette deck and the synchronized recording mode is indicated on
the CD player.
(For details, refer to the CD player's operating instructions.)
© To stop synchronized recording, press the stop button on deck B and
stop button on CD.
The synchronized recording mode is cancelled for both the cassette
deck and CD player.
® To stop synchronized recording temporarily, press the stop button on
the CD player. A 5-second blank space is created on the tape, after
which the recording pause mode is set. The "SYNC" indicator flashes.
To resume synchronized recording, press the PLAY button on the CD
player.
Note:
• If synchronized recording is started when the CD player is in a mode
other than the slop or pause mode or when no disc is set, the "SYNC"
indicator on the cassette deck flashes and the recording pause mode is
set until synchronized recording is possible on the CD player.
• In the synchronized recording mode, only the STOP button on deck B
will function.
Caution:
• Do not set the cassette deck to the synchronized recording mode when
the CD player is in the play mode. Also, do not turn off the power of the
cassette deck or the CD player during synchronized recording. Doing so
can result in malfunction.
• During the editing operation, when using the editing functions on the
CD player, be sure to select a tape with a sufficiently long recording
time.
For the CD player's editing functions, refer to the CD player's operating
instructions.
TAPE COUNTER AND MEMORY STOP
RESET
COUNTER
MEMORY
V Operation of the Tape Counter
(1) Press the RESET button to reset the counter to "oooo".
(2) By using the PLAY, FF, or REW functions, the reading of the
counter will change to indicate index position.
• During recording and playback operations, the counter is useful for
noting the location of existing programs or positions where
recording is to be started.
• The reading of this counter does not correspond with that of any
other deck,
(3) deck A and deck B have the memory of their own counter.
2) MEMORY STOP Operation
(1) During recording or playback, the Memory Stop feature can be
used to locate a particular point on the tape. Press the COUNTER
RESET button at the desired point.
(2) Then Press the COUNTER MEMORY button, the MEMO indicator
lights.
(3) When the Rewind ( ) button is pressed during forward tape
travel (0), or the Fast Forward ( ►► ) button is pressed during
reverse tape travel (
0 ), the tape is rapidly rewound lor advanced)
until the counter indication of " 0000 " is reached.
• The Memory Stop feature will rewind or forward the tape to within
-5 counts in the forward (0) direction (from "flooo" to "-33C5") and
to within -
e 5 counts in the reverse lO direction (from "aooo" to
"OOOS"). After this, several seconds are required for correct'ive
operations.
• The Memory Stop function operates independently in both direc­
tions for deck A and deck B.
Caution:
If the memory stop operation is performed after repeated fast-
forwarding or rewinding, the tape may not stop at the proper position.
13