Toshiba MA-55 - Manual (Page 8)

EO1-11074
5. Outline of Preparation Procedure Before Operatino
the ECR
This chapter shows the outline of set-up procedure of the ECR before actually starting
the ECR operation.
Remove the cash register from the carton, referring to
Chapter "2. Unpacking" on page 2. And take out all the
parts and accessories.
Remove the tapes and seals that are holding parts or
~j| protecting the register surfaces.________________
Plug the power cord of the register into a wall outlet.
Make sure that the outlet voltage matches that of the
power required for the register.
NOTE: Before the batteries are inserted, be sure to insert
the power plug.
Detach the Paper Cover and the Battery Cover, then
insert the batteries (3 pieces).
WARNING: Be certain to insert the batteries enclosed in the
package. If they are not insert and the power is
turned OFF (including a power failure occurrence),
the sales data and the programmed data will be
cleared.
Insert the Control Key (M Key) into the Control Lock.
OFF
REG2 1 REG1
Turn the Control Lock to the REG1 position.
OFF
REG2 i^EGt
-6-