VTech 917ADX - Manual (Page 14)

O P E R A T I N G I N S T R U C T I O N S
'¿£Ì
OPTIONAL HEADSET INSTALLATION AND OPERATING INSTRUCT
(on the Handset) or SPKR (on the Base Unit),
then REDIAL.
STORING A REDIAL NUMBER IN MEMORY
DIAL________________________________
■ To store the last number you dialed as a
regular Memory Dial number, do the follow­
ing on the Handset:
■ Press PRG/PRV
■ Press the Memory Location key where the
phone number will be stored (0-9)
■ Press REDIAL
■ Press MEM
CHANGING CHANNELS
■ If you are experiencing noise or interfer­
ence when using your Handset, press the
CHAN key to switch to a clear channel. This
function is available when you are on a call or
intercom.
I NOTE: You may need to press CHAN
more than once to find an interference-free
channel.
■ Your 9i 7 ADX cordless telephone is equip­
ped with a 2.5mm Headset Jack for use with
an optional accessory Headset for hands­
free operation
■ If you choose to use the Headset option,
you must do the following:
INSTALLATION
■ Obtain an optional accessory Headset,
which is compatible with the 917ADX.
In the U.S. please contact,VTech Communi­
cations Customer Service, toll-free at 1-800­
595-9511, in Canada call VTech Electronics
at 1-800-267-7377 for dealer information in
your local area. You can also purchase ai'A-.-:
compatible Headset directly from VTech Com­
munications Customer Service.
■ Once you have a compatible 2.5mm Head­
set, locate the Headset Jack on the Handset
of your 917 ADX. Connect the plug on the
Headset to the jack on the cordless Handset.
The plug should fit securely. Do not force the
connection. See illustration.
■ The 917 ADX \s also equipped with a
detachable belt clip. Align the pins on the
inside edge of the belt clip with the notches
on the side of the 917 ADX handset. The belt
clip should snap securely into place. Do not
force the connection. See illustration.
OPERATION_______________ ~ I ,
I NOTE: Whenever a compatible Headset
is connected to the cordless Handset, the mi­
crophone on the Handset will be MUTED.
This is done to limit the effect of background
noise.
I The following operational characteristics
apply to VTech Headsets. The same may
also apply to other (non-VTech) compatible
headsets, but VTech assumes no responsibil­
ity for their performance.
■ The VTech brand compatible Headset has
a monaural design which is reversible, so you
can wear your Headset on either the left or
right ear, leaving one ear free for room con­
versation
■ The headband can be adjusted to fit the
contour of your head. Using both hands.