Toshiba TEC EM-31061A - Manual (Page 5)

1. INTRODUCTION
EM1-31061A
1. INTRODUCTION
0
Prohibited
■ Do not scratch, damage or modify
the power cords. Also, do not place
heavy objects on, pull on, or exces­
sively bend the cords, as this may
cause (ire or electrical shock.
Discoonecl the plug.
■ Continued use of the machines in
an abnormal condition such as when
the machines are producing smoke or
strange smells may cause fire or
electric shock. In these cases,
immediately turn off the power
switches and disconnect the power
cord plugs from the outlet. Then,
contact your sales agent {or mainte­
nance and service agent).
■ If foreign objects (metal fragments,
water, liquids) enter the machines, Rrst
turn off the power switches and
disconnect the power cord plugs from
the outlet, and the contact your sales
agent (or maintenance and service
agent). Continued use of the machine
in that condition may cause fire or
electric shock.
Oisconm ■nn^ Ihe plug.
■ If the machines are dropped or their
cabinets damaged, first turn off the
power switches and disconnect the
power cord plugs from the outlet, and
the contact your sales agent (or
maintenance and service agent).
Continued use of the machine in that
condition may cause fire or electric
shock.
■ Ensure that the equipment is
properly grounded. Extension cables
should also be grounded. Fire or
electric shock can occur on improp­
erly grounded equipment.
0
Prcjhibited
■ Do not install the machines where
they might be exposed to direct
sunlight, high humidity, or dust.
Othenvise fire or electric shock
could occur.
0
Prohibited
[Precautions During installation]
■ Do not place the machines on
unstable or slanted surfaces, as they
may drop or fall and cause injury.
■ Do not place heavy objects on top of
the machines, as these items may
become unbalanced and fall causing
injury.
0 ■ Do not block the ventilation slits of
the machines, as this will cause heat
to build up inside the machines and
may cause fire.
1-3