Toshiba TEC EM-31061A User Manual
Page 11
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
6. INSTALLING THE REMOTE PIPE
EM1-31061A
6. INSTALLING THE REMOTE PIPE
2. Attach the joined plate to the remote display using
screws © (FL-4X6).
3. Pass the remote cable through the remote pipe.
4. Attach the remote pipe to the joined plate using
screws © (B-4X4).
NOTE: The joined plate, remote pipe, screws
©,
and
©
are supplied with the scale.
5. Pass the remote cable through the remote stand.
6. Attach the pipe support plate to the remote stand
using screws ®.
NOTE: The pipe support plate is supplied with the
scale.
7. Attach the remote pipe to the remote stand using
screws ®.
8. Fix the remote cable to the remote stand using
clamp and screw ®. There are two cable outlets
which should be used according to the usage.
Clamp
6- 1