Level adjustment, Installing the remote pipe, For remote display type with pipe only) – Toshiba TEC EM-31061A User Manual
Page 10: Level adjustment -1, Installing the remote pipe -1
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
5. LEVEL ADJUSTMENT
EM1-31061A
5. LEVEL ADJUSTMENT
Set the scale on a stable and level surface. Level the scale by
turning the adjustable legs so that the air bubble is inside the
center circle.
NOTE: The attached position of the level gauge differs
according to model.
Level Gauge
Correct
Incorrect
{for remote display type with pipe only)
1. Remove the clamp and detach the remote display
from the remote stand.
NOTE: Be careful NOT TO LOSE the clamp, screws
® (FL-4X25), and screw® (FL-4x8).
Remote
Stand
5- 1
This manual is related to the following products: